Water heater

Hot water

- from the tap or for a shower - true luxury when traveling

When traveling, it is not uncommon that one is dusty, really dirty or frozen. Then hot water from the tap is just wonderful. We can realize this "luxury" space saving and efficient even in the smallest space.

We install one of the smallest water heaters, the Nautic Compact, from the company ELGENA.

ELGENA is located in Munich and has been engaged from 1955 in the production of hot water boilers and has specialised in producing hot water boiler for mobile use.

It’s specially designed for tough mobile use and adaptable to the appropriate vehicle infrastructure. The boiler is connected directly to the engine cooling water and thus the water is heated while the engine is running via the built-in heat exchanger in the unit. The water is thus heated while driving efficiently and without additional power consumption and reaches approximately the same temperature as the cooling water. The device can also optionally be connected to an existing hot water heater via the built-in heat exchanger.

Specifications:

  • Content is 6 liters or 10 liters
  • Boilers and heat exchangers are made of the best acid-resistant stainless steel V4A material and fully insulated
  • Optionally available in three versions: with heat exchanger for connection to the cooling water system of the engine / 230 V, 12 V or 24 V / combined with both adapters
  • 1 m connection cable with plug
  • Thermostat adjustable from 30 ° - 85 ° C
  • Frost monitor and overheating protection
  • Including 3 bar safety valve
  • Dimensions (L x H x W): 6 liters 39 x 23 x 22 cm 2.8 kg / 10 liters 54 x 23 x 22 cm 4.5 kg
  • Can be installed as standard or later on to any cold water supply with hoses
  • Is possible to connect to a submersible pump, a foot or hand pump and a pressure pump
  • With corresponding pressure reducer also to a water line at a higher pressure than 2.5 bar connectable
  • Hose connections designed for compensation of vibrations in mobile use
  • Even with an empty water tank, the boiler remains full and can never be pumped empty.
  • A full discharge is therefore only possible when opening the water drain valve
  • Thanks to the excellent insulation hot water is also available the next day
  • Installation can be, for example, be made easily in the storage space under a sofa or wherever the ideal place is available
  • With 5 years manufacturer's warranty
Capacity: 6 Liters 10 Liters
Dimensions (LxWxH): 39 x 22 x 23 cm 54 x 22 x 23 cm
Weight: 2,8 kg 3,5 kg
Mounting Position: lying floor - installation lying floor - installation
Operation Pressure: 0 - 3 bar 0 - 3 bar
Heating Element: Stainless steel V4A / Incoloy Stainless steel V4A / Incoloy
Voltage / Power: 230V - 660W (~3A)
230V - 330W (
~1.5A)
12V - 200W (
~16A)
24V - 400W (
~32A)
or combined!
230V - 660W (~3A)
230V - 330W (
~1.5A)
12V - 200W (
~16A)
24V - 400W (
~32A)
or combined!
Heating time: ~22 min (55°C 660W) ~27 min (55°C 1000W)
Cable: 230V 1m mit Schukostecker
12V 1m mit 2,5mm2
230V 1m mit Schukostecker
12V 1m mit 2,5mm2
Wassertemperatur: 30°C - 80°C continuously adjustable 30°C - 80°C continuously adjustable
Anti Freeze: 0°C - F adjustable 0°C - F adjustable
Water Tank: Stainless steel V4A Stainless steel V4A
Overpressure Protection: Safety valve to 3 bar Safety valve to 3 bar
Water Supply: Ø 10mm for hose connection Ø 10mm for hose connection
Boiler Drainage: Drain valve manually Drain valve manually
Warranty: 5 years factory Warranty 5 years factory Warranty

Zum Onlineshop

Privacy Policy Disclaimer Contact us Your way to us Cookies

Copyright Đ 2016 Tom's Fahrzeugtechnik. All Rights Reserved.

We use cookies to make your experience on our website as pleasant as possible. Visit our privacy policy to learn more. By using our website, you agree to our use of cookies. Learn more